|
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled. Most standard LEDs with colors such as red, amber, orange, yellow, and green have forward voltages below 3.0 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board connector. - Output Update Rate: 30 updates/second
- Output Anode Voltage: 3.3VDC
- Output Current (max): 30mA
- LED Forward Voltage (max): 3.0VDC
The PhidgetLED 64 operates as a 2 x 32 multiplexer with 2 anodes and 32 cathodes. Comes packaged with a 180cm USB cable, 16 Double Ended cables (cut these in half and solder cut end to LED), and a Getting Started Manual. A 6 to 12VDC power supply, center positive polarity is required to power the 1030. Must be purchased separately. For more information see:  |
My Cart
